Powder flow
Dust, clumping, bridging or density changes may alter feeding and auger behavior.
Material evidence before final configuration
Request sample testing for real material behavior.
Use sample testing when real material behavior can change feeding, dosing, seal cleanliness, pack behavior or the practical machine route.
- Material
- Behavior and sample status
- Pack
- Format, fill and seal target
- Line
- Output and handoff boundary
01When testing is needed
Use samples when behavior can change the route.
Testing is most useful when an engineering decision remains open. It is not a generic pass/fail badge or a substitute for the project acceptance method.
Granule handling
Fragility, fines or segregation may alter transfer and metering.
Liquid cut-off
Viscosity, foam or drip may alter pump and seal-zone behavior.
Paste residue
Stringing, particles or residue may alter valves, nozzles and cleaning.
Pack behavior
Film, seal window or product carryover may alter finished-pack quality.
Open output basis
The target cannot be reviewed responsibly without representative running conditions.
02Buyer preparation
Bring the conditions needed for a useful review.
The website form is a pre-screening request, not automatic sample acceptance or a test booking. Samples, film, photos, video or drawings move only through a follow-up channel confirmed after inquiry review.
| Buyer input | Preparation boundary |
|---|---|
| Representative material | State the sample condition, batch relevance, storage and any confidentiality boundary. |
| Target fill | Provide the nominal dose and the observation or measurement method expected. |
| Pack format and size | Share stick or sachet type, finished dimensions, seal layout and opening target. |
| Film or current pack | Provide film structure information or an existing pack sample through the agreed follow-up channel. |
| Target output | Share the desired rate or daily target as a project goal, not a confirmed result. |
| Known problems | Describe dust, flow, breakage, viscosity, residue, dripping or sealing concerns already observed. |
Do not ship a sample before written acceptance.
Wait until AIX PACK confirms the receiving address, sample quantity, packaging, transport and handling conditions in writing. Hazardous, controlled, perishable or unknown-composition materials must not be sent unless AIX PACK explicitly accepts them.
Fees, NDA terms, test method, feedback or report form, timing, and the return or disposal of remaining material are confirmed separately for each project.
03What AIX PACK can evaluate
Turn observations into route decisions.
Evaluation language remains conditional on the representative sample, available machine context, pack inputs and the agreed observation method.
Feeding and dosing route
Compare the material behavior with candidate feeding and metering principles.
Fill observation
Observe filling behavior under the stated sample, dose and method conditions.
Seal cleanliness
Check visible carryover or residue around the proposed seal zone.
Film and pack behavior
Review forming, filling and sealing interactions where suitable inputs are available.
Visible running stability
Record visible interruptions, carryover or handling issues during the agreed review.
Remaining open items
List conditions that still require project protocol, further samples or buyer confirmation.
04Evidence boundary
Separate observation from confirmation.
The sample route identifies what was visible, what was recorded and what remains open. Final performance and acceptance language belongs in the approved project protocol and contract.
- Observe
- Material response, filling behavior, carryover, seal-zone condition and visible running stability under stated conditions.
- Record
- Sample identity, dose, pack inputs, setup context, method and limitations agreed for the review.
- Keep open
- Final output, lane count, filling performance, cleaning method and acceptance result until the written project basis supports them.
05 / Sample testing inquiry
Send the material and project context available today.
This form is a pre-screening request. It does not create automatic sample acceptance, a test booking or a service commitment.
- Do not ship material until AIX PACK provides written acceptance and shipping instructions.
- Hazardous, controlled, perishable or unknown-composition materials require explicit acceptance.
- Fees, NDA, method, timing, feedback and remaining-sample handling stay project-specific.
Sample testing inquiry
06What happens next
The inquiry starts a pre-screening route, not an automatic promise.
AIX PACK first reviews the project conditions, then confirms whether the material can be accepted and what test scope may be appropriate. Shipping, testing, feedback and remaining-material handling are confirmed only after acceptance.